Radio Frequency Rotary Joint with Frequency Range from 1GHz~50GHz

2019-08-21

High Frequency Through-Bore Slip Rings can be used in many cases in place of an RF Rotary Joint in applications where the HF range is within 500MHz.  All critical parameters are maintained including insertion loss, standing wave ratio and cross-talk when multiple channels are required.

 

RF Rotary joint according to the principle of high frequency signal of skin effect and the transmission adopts the structure of the coaxial cable of the simulation, at the same time the internal key contact using imported high elastic wear-resisting material.

 

LPHF-01 slip rings are 1 channel High Frequency, standard, off-the-shelf. It could support 1 channel High Frequencys(up to 18Ghz) transmitting on 360° rotating, The RF rotary joints are needed wherever high-frequency signals have to be transmitted between a fixed platform and second platform in continuous rotation.Such applications includs traditional radar technology for ai traffic control or anti-missile defence,medical engineering, V-sat and Satcom technology as well as TV camera systems or cable drums that allow sensitive cable to be wound.the signal frequency can be DC TO 40GHz. HF01 are often used with electronic sliprings, call optical-electrical hybrid slipring, transmit power and high speed data.

Radio Frequency Rotary Joint

Sähköpostikonsultointi
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.